![]() ![]() HD wallpapers which gives real door look.Make your phone secure with beautiful and HD wallpapers try this amazing screen lock app and share with your friends and family It will produce realistic door sounds which makes it more fun to use. This screen lock contains wooden door styles to set as screen lock which you can unlock by tap on the door to open the double doors with a beautiful smooth door animation. There are a number of screen locks, but the door lock screen is one of the secure, efficient & cool screen lock. It is the beautiful lock screen for the people who want some uniqueness. A Door screen lock is a unique and amazing idea for your smart phone security. You have now successfully fitted locks to your Seconline Security Screen Door. Retest the door to make sure that everything is functioning. Once you are completely confident the lock is working correctly, use the screws provided in the accessory pack pre-drill the holes and fit the locking plates. You must have the same action in the fully close position as you have when you simulate this action in the open position. Retest this procedure from the inside by using the internal snib. Repeat this process several times, both in the unlocked open position and then in the locked position. Make sure that you have the same locking feel and action as you had when the door was in the open position. You may have to use the edge of your chisel to depress the trigger to engage the central tongue. Once you have cleaned all holes thoroughly, stand outside and close the door and test the lock using the key. If they are restricted and do not go all the way into the holes provided then the lock mechanism will not deadlock. It is important that this job is done very carefully particularly on the centre locking tongue. Once this is completed use a 10 mm sharp wood chisel to remove the pieces of timber and clean the holes carefully making sure to remove any possible points of restriction for the door tongues. Once you have completed this use a sharp 3 mm drill to ribbon drill completely around the marks so as to weaken the timber. Now with the striker plates that will be located in your accessory pack, hold these centre to the horizontal marks you have made on the door jamb and use a pencil or pen to completely mark out the actual cut-out using the plate as a guide. Now with a straight edge of some description (a school ruler is ideal for this purpose), make horizontal marks directly into the door jamb from each of these marks that you have made above below the locking tongues. It must never be allowed to go inside the striker hole cut-out. Its purpose and sole purpose is to trigger the main tongue into the locking position inside the door cut-outs on the door jamb. It is important at this point that we recognise that the action of the small trigger above the main tongue is not to be inside the striker hole cut-outs. In the case of a single lock mark above and below the centre tongue. Now with a sharp pencil or any type of marking pen that has a fine point and can be removed, push the door up to the door jamb and mark above and below all three tongues. Now without touching the door handles roll the internal snip across to the 10 past or 10 to position whichever is the case based on a left or right hand door lock, to engage the lock into the full lock position which in the case of a three-point lock door will engage all three tongues. Hold the door now in the open position engage the small trigger located above the main tongue to engage the tongue into the locking position. Both locks will lock with the internal snib and in the case of the three-point lock all three tongues will engage simultaneously. The procedure after the lock is installed from an ongoing point of view is no different for both locks as they will deadlock with the key and also deadlock the internal snip with the key. There are two choices in locks when you buy a Seconline Security/Barrier Screen Door. Now we have established the above let’s now proceed with the actual lock cut outs to the door jamb. Furthermore we discussed how to test the lock to make sure you have a good understanding of how to use the lock and, most importantly, gain a good feel of the locking action from a physical feel, the sound of how the lock works and of the visual action of the lock. In the previous blogs we discussed how to firstly hinge a door to a timber jamb and then how to fit the lock furniture provided in the accessory pack. Fitting a Hinged Security Screen Door Lock ![]()
0 Comments
Leave a Reply. |